Can you put wallpaper in the shower? Yes, and this is how
Share
Quick summary
Yes, the inside of a shower or bath can be covered with a decorative material, but not just any material. The one that resists direct water is fibreglass wallcovering with waterproofing varnish:
- It is installed over tiles, which are smoothed first, with no building work.
- It creates a smooth, seamless wall with a continuous design.
- It gives the best finish of all our materials.
Non-woven wallpaper and linen vinyl wallpaper are not designed for direct contact with water. Installation in the shower should always be carried out by a professional.
“Can wallpaper be put inside the shower?” For years, the usual answer has been no: only tiles are suitable for the wet area. And with traditional wallpaper, that is true.
But today there is a material designed precisely for this. It allows you to bring the same design from the rest of the bathroom into the shower, or to update tiles you do not like without removing them. In this guide, we explain what it is, how it is installed and what you should know before deciding.
Why traditional wallpaper is not suitable for the shower
Non-woven wallpaper is washable, but it is designed for dry rooms. Under direct water from the shower it will lift, stain and deteriorate in a short time.
Linen vinyl wallpaper works very well in the rest of the bathroom: it resists ambient humidity and can be cleaned with soap and water. But it is not designed to be exposed to the shower spray every day. Outside the wet area it is ideal; inside, it is not.
The inside of the shower or bath requires a material that can be waterproofed once installed.
The solution: fibreglass wallcovering with varnish
It is the most resistant material we work with and the one with the best finish. This is how it is installed in a shower:
- The tiles are smoothed first with a special filler for wet areas, and a primer is applied.
- The fibreglass is installed.
- Inside the shower or bath, it is waterproofed with a special varnish.
It needs no building work: it is a matter of preparing the surface, not of renovating. The result is a completely smooth wall, without joints, with a continuous design throughout the shower.
Fibreglass comes in rolls 95 cm wide, so a wall is covered with just a few drops.
See the fibreglass wallcovering.
Which design to choose for a shower
Once the tiles are smoothed, the joints disappear and the wall is left flat. That gives you complete freedom of design: botanicals with movement, geometrics, stripes or plain backgrounds.
If you want continuity throughout the bathroom, you can use the same design in linen vinyl wallpaper outside the shower and in fibreglass inside.
How to look after the wallcovering in the shower
- Clean with water and mild soap using a cloth or soft sponge.
- Avoid scouring pads, abrasive products and solvents.
- Ventilate after showering: this extends the life of any bathroom material, tiles included.
Our wallpapers are designed and made in Spain, with UVgel inks that are highly resistant to scratches and frequent cleaning.
Most common mistakes
1. Putting linen vinyl wallpaper inside the shower
It is an excellent material for the rest of the bathroom, but not for direct contact with water. If you want the design to continue, use the same design in linen vinyl wallpaper outside the shower and in fibreglass inside.
2. Installing it yourself
Fibreglass requires smoothing, priming and varnishing. A mistake during installation in the wet area is expensive. For the shower, always use a professional.
3. Installing it over damaged tiles
If any tiles are broken, loose or damp, they must be repaired before smoothing. Before deciding, check the condition of the surface.
Frequently asked questions
Can wallpaper be put inside the shower?
Traditional wallpaper, no. But the shower can be covered with fibreglass wallcovering waterproofed with a special varnish, which resists direct water.
Do the shower tiles have to be removed?
No. The tiles are smoothed with a special filler for wet areas and primed, but they are not removed. No building work is needed.
Is it also suitable for the bath?
Yes. Fibreglass with waterproofing varnish can be used on the wall around the bath, just as in the shower.
Can I use the same design inside and outside the shower?
Yes, and that is one of its great advantages. You can use the same design throughout the bathroom, choosing the right material for each area: linen vinyl wallpaper outside the wet area and fibreglass inside.
Which adhesive and varnish should I use?
Those in the WALL₂O Pack: a specific adhesive for wet areas and a two-component protective varnish suitable for shower water after 24 hours. One pack covers about 14 m², the equivalent of 3 rolls, and we send it to you.
Can I install it myself?
We do not recommend doing it yourself in the shower. Fibreglass requires smoothing, priming and varnishing. If needed, we can put you in touch with independent installers.
How do I clean it?
With water and mild soap, using a cloth or soft sponge. Avoid scouring pads, abrasives and solvents.

