← Roll calculator

Measuring guide

be Tip-Top

How to measure your wall

With the height, the width and the doors, you will know how many rolls you need. Always measure in centimetres.

Door 80 cm Window not deducted deducted Width 400 cm Height 250 cm 1 2 3 Skirting board Measure the height at points 1, 2 and 3 and use the largest
01

Measure the height

From ceiling to skirting board, or to the floor if there is no skirting board. Measure in three places: on the left, in the centre and on the right, and use the largest measurement. If there are several walls, use the tallest one.

02

Measure the width

From corner to corner. If you are wallpapering several walls, measure each one separately.

03

Deduct the doors

Deduct the width of each door. Windows are not deducted: the cut-out pieces around them cannot be reused and the pattern must match above and below.

04

Take the pattern repeat into account

This is the vertical measurement at which the pattern repeats. For the pattern to match, each drop must start at the same point in the pattern, so the larger the repeat, the more wallpaper is needed.

Example

The wall in the diagram, in linen vinyl wallpaper, 50 cm × 9 m roll, no pattern repeat

1Width to cover400 − 80 for the door. The window is not deducted320 cm
2Drops320 ÷ 50 cm wide = 6.47 drops
3Length of each drop250 high + 10 cm margin260 cm
4Drops per roll900 ÷ 260 = 3.43 drops
5Rolls7 ÷ 3 = 2.33 rolls

Drops and rolls are always rounded up. Drops per roll are rounded down, because a piece shorter than the wall cannot be used as a drop. If the pattern has a repeat, the length of each drop is rounded to a multiple of the pattern repeat.

Linen vinyl wallpaper

50 cm × 9 m

Non-woven wallpaper

53 cm × 10 m

Fibreglass wallcovering

95 cm × 5 m

Roll calculator

Use the roll calculator, here or on the product page of each design: it already includes the cutting margin and the pattern repeat. If you have sloped ceilings or many openings, write to us and we will calculate it with you.