WALL₂O: fibreglass wallcovering for showers and over tiles

WALL₂O is our wall covering system for walls exposed to water: the inside of the shower, the bathtub surround, or the kitchen backsplash.

It allows you to choose any of our designs and apply it to areas where, until now, only tiles were an option. And if the wall is already tiled, it can be installed on top, with no building work.

What is WALL₂O

A system made up of three elements that work together:

Element What it provides
Fibreglass wallcovering Brings the design. It looks like wallpaper, with a fine piqué texture and a matt finish, but its fibreglass structure makes it highly resistant and stable against moisture.
Special adhesive for fibreglass Fixes the wallcovering to the wall, including over smooth tiles.
Waterproofing varnish Seals the surface and prepares it for direct contact with water.

Fibreglass alone is not waterproof. It is the varnish that makes it suitable for use inside the shower. That is why we call it a system, not waterproof wallpaper.

The wallcovering weighs 210 g/m² and comes in rolls 95 cm wide by 5 m long, printed with UVgel inks. It is designed and made in Spain.

Where you can install it

  • Inside the shower and around the bathtub.
  • Over tiles, in bathrooms and kitchens.
  • Over plasterboard and smooth walls.
  • In hotels, restaurants or clinics, where the walls are cleaned daily.

How it is installed

Wall Preparation Waterproofing varnish
Smooth and painted None Only if exposed to direct water
Plasterboard Primer Only if exposed to direct water
Tile Smooth the joints with a special joint filler for wet areas and apply primer Only if exposed to direct water
Inside the shower or bathtub The one suitable for the wall Always

The adhesive is applied to the wall, and then the strips of wallcovering are placed.

It does not require building work in any case. However, we recommend hiring a professional for the installation: the preparation of the wall is what determines the result. The steps, one by one, are in our fibreglass installation guide.

WALL₂O Pack: adhesive and varnish

The adhesive and varnish are sold together in the WALL₂O Pack.

  • One pack covers approximately 14 m², the equivalent of 3 rolls of fibreglass.
  • The joint filler is not included: it is provided by the installer.
  • It is shipped separately from the rolls and, for now, only to Spain.

Cleaning and resistance

Once varnished, the surface is highly washable and easy to maintain.

The varnish has been tested against frequent washing and common cleaning products, such as chlorine-based products, degreasers, descalers and disinfectants. That is why WALL₂O works both in homes and in hospitality or clinic projects.

Frequently asked questions

Can wallpaper be used inside the shower?

Conventional wallpaper, no. WALL₂O, yes: the base is made of fibreglass and the surface is protected with a waterproofing varnish.

Can it be installed over tiles?

Yes. The joints are smoothed with a special joint filler for wet areas, primer is applied, and it is installed on top. We explain this in How to cover tiles with no building work.

Can I choose any design?

Yes. Our designs can be made in fibreglass; on each product page, you just need to choose that material.

Does the varnish change the appearance of the design?

The varnish is transparent and matt, and it does not yellow over time.

When can the shower be used?

24 hours after applying the varnish.

Shall we talk about your project?

Choose your design, add the WALL₂O Pack and, if you have questions about the wall or the measurements, book a video call consultation. We will be delighted to help you.

View bathroom designs View the WALL₂O Pack